What is a Good Program?

code-woods-3

How do you know if the software you are building is “good” software?  How do you know if the programmers on your team are “good” programmers?   As a programmer, how do we systematically improve ourselves?

The goal of most programmers should be to improve their craft of building programs.  A good programmer builds good programs.  A great programmer builds great programs.  As programmers, we need a way to judge the quality of the programs we build if we have any hope of becoming better programmers.

What is the problem you are trying to solve?

A traveler approaches a heavily wooded area he must pass in order to get to his destination. There are several other travelers already here. They are scrambling to cut a path through the woods so they too can get to the other side. The traveler pulls out a machete and starts chopping away at the brush and trees. After several hours of hard physical labor in the hot sun, chopping away with his machete, the traveler steps back to see his progress. He barely made a dent on the heavily wooded area, his hands are bruised and worn, he has used up most of his water, and he is exhausted. A second traveler walks up to the first traveler and asks him what he is doing. The first traveler responds, “I am trying to cut a path through these woods.” The second traveler responds, “Why?” The first traveler snaps back in frustration, “Obviously, I need to get to the other side of these woods!” The second traveler responds, “That wasn’t obvious at all! You see, I just came down that hill over there and from there you can clearly see that the wooded area is deep, but narrow. You will die before you cut your way through the woods with that machete. It would be much easier to just go around. As a matter of fact, if you look to your right you can see a taxi stand in the distance. He can get you to the other side quickly. “

As programmers, what is the problem we are trying to solve?

The first traveler lost sight of his goal. Once he encountered the wooded area with all of the other travelers already cutting their way through the woods, the problem went from getting to the other side to chopping down trees. Instead of stepping back to evaluate the possibilities and try to find the most efficient way to the other side, he joined the crowd that was already chopping away at the woods.

Programs are tools

Programs are solutions to problems. They are tools to help people accomplish their goals. Just like the first traveler in our story, programmers often lose sight of the problem they are trying to solve, wasting most of their time solving the wrong problems. Understanding the problem you are trying to solve is the key to writing good software.

Programs are tools designed to solve a problem for an intended user.

Good tools are effective. They solve the problem they were built to solve. A good hammer can hammer in nails. A good screwdriver can screw and unscrew screws. A good web browser can browse the web. A good music player can play music. A good program solves the problem it is supposed to solve. A good program is effective.

Good tools are robust. A hammer that falls apart after just one use is not a very good hammer. Similarly a program that crashes with bad inputs is not a very good program. A good program is robust.

Good tools are efficient. An electric screwdriver that takes a long time to screw in a screw is not as good as an electric screwdriver that can screw in screws quickly. Similarly, a web browser that takes a long time to render a web page is not as good as one that does so quickly. Good programs are efficient.

Like any other good tool, good programs are effective, robust, and efficient. Most tools are built to solve a well defined problem that is not expected to change. A nail will always behave as a nail does, thus a hammer’s job will never need to change. Programs, on the other hand are typically built to solve a problem that is not well defined. Requirements change all the time. A good program has to be flexible so it can be modified easily when requirements do change.

Good programs are flexible.

Creating flexible programs that can easily be adapted to meet changing requirements is one of the biggest challenges in software development. I stated earlier the key to building a good program is understanding the problem you are trying to solve. Programming is an exercise in requirements refinement. We start with an understanding of the fundamental problem we are trying to solve by using a plain language. In order to create a solution for the problem we start defining requirements. Some requirements are based on fact and some are based on assumptions. Throughout the software development process we refine those requirements, adding more detail at every step. Fully specified, detailed requirements are called code. The code we write is nothing more then a very detailed requirements document a compiler can turn into an executable program.

The challenge comes from changing requirements over time. Our understanding of a problem may change. The landscape in which we are operating may change. Technology may change. The scope of the problem may change. We have to be ready for it all.

When requirements change we have three choices: do nothing, build a new program, or modify the original program. Building a new program is a perfectly acceptable solution, and may be the right answer in some cases. Most of the time due to time and budget constraints, the best answer is to modify the original program. A good program will spend most of its life in production. During that time the requirements of the users and landscape is likely to change. When that happens your program no longer meets our first requirement for good programs: A good program is effective. The requirements of the problem no longer match the requirements specified in your code. Your program no longer solves the problem it was intended it solve. It is broken. You have to fix it as quickly as possible. If the program is flexible enough you can modify it quickly and cheaply to meet the new requirements. Most programs are not built this way and end up failing as a consequence.

To build a flexible program, a programmer should ask the question: “What requirements are least likely to change, and what requirements are most likely change?” The answer to this question will inform every aspect of your program architecture and design. It is impossible to build a good program without the answer to this question.

Good code?

Programs are made of code. Good programs are made of good code.
In this post I have specified the top-level requirements for what a good program is. In the next post I will start to refine these requirements further to answer the question, “What is good code?”

We're Hiring Engineers at Ladders. Come join our team!

3 thoughts on “What is a Good Program?

  1. Rajasekhar Srinivasa Seshasaye Velamuri April 27, 2016 / 1:39 am

    The crux of the article is

    Programs are tools.
    Programs are solutions to problems.
    A program that crashes with bad inputs is not a very good program.
    Good programs are flexible.

    Beautifully explained !

  2. Kyle G April 27, 2016 / 8:31 am

    Great article. It is important to know how to code (I’m still learning core concepts) but equally important is understanding your clients needs and workflow. You should spend time observing or better yet doing your clients job before writing any code.

    Observe, listen, code, get feedback (focus on the negative feedback) then adjust your code. It’s all about the user.

    I look forward to the next article about good code.

  3. Vikram April 27, 2016 / 9:02 am

    Good Article. The example used above is very good. Waiting for 2nd part “What is good code?”

Leave a Reply

Your email address will not be published. Required fields are marked *

1 × five =